“Arrived when he said, worked away quietly and left the place spotless. The measuring was clearly done properly because everything fit first time.”
Roisin D.
Sligo · 6 windows
€55 – €170 per window
Fitted nationwide
Perfect Fit Blinds
Clip-in frames that fit uPVC windows with no drilling at all. Below: what they are, the rooms they suit, the rooms they don't, and a step-by-step fitting guide.
What it is
About perfect fit blinds
Perfect fit blinds sit in their own slim frame that clips into the rubber beading between the glass and the uPVC window frame. Nothing is drilled, nothing is screwed, and the blind sits flush against the glass so it moves with the window when you open it. For Ireland's enormous stock of uPVC casement windows — and for anyone renting — this is often the fastest and cleanest solution available.
Best for
- uPVC casement windows and uPVC doors
- Rented properties where drilling is not allowed
- Conservatories and sunrooms
- Homes with young children — no cords, no chains, nothing hanging
Think twice about
- Timber and aluminium windows without a suitable beading gap
- Windows with very deep or shaped glazing beads
- Any window where the glazing bead gap is under about 12mm
Materials & options
What to specify
Available as venetian, pleated or cellular blinds within the frame. Cellular (honeycomb) versions add genuine insulation, which is worth specifying in conservatories and north-facing rooms. Frames come in white, brown, anthracite and cream to match common uPVC finishes.
Cleaning & care
Wipe the frame and slats with a damp cloth. The whole unit unclips in seconds, which makes it the easiest blind to take down for a proper clean.
Fitting guide
How to fit perfect fit blinds
Follow these in order. Most fitting problems come from skipping the measuring and levelling steps rather than from the blind itself.
Check the beading gap
Measure the gap between the glass and the frame where the rubber gasket sits. You need roughly 12mm or more for the brackets to grip. If the gap is smaller, perfect fit will not work on that window.
Measure the sight line
Measure the visible glass area — height and width — from the inside edge of the beading, not the whole window. The frame is made to that size.
Push in the brackets
The small L-shaped brackets push into the gasket gap at each corner and midpoint. They should go in with firm thumb pressure and stay put. Four brackets minimum, six on tall windows.
Assemble the frame
The four frame sections push together at the corners. Feed the blind into the top rail before closing the last corner.
Clip the frame onto the brackets
Line the frame up with the brackets and push it home. It clips on with an audible snap all round.
Test with the window open
Open and close the window fully. The blind should move with the sash and not foul the handle or the frame. If it catches, reposition the brackets rather than forcing it.
Verified reviews
What customers say
Recent reviews from homes across Ireland.
“Left the samples with me for a week so I could see them in the room light. Nobody else offered that and it made the decision much easier.”
Tomas B.
Tipperary · Sitting room
“Does exactly what we needed. Would have been five stars but the first fitting date slipped by a week.”
Emer W.
Louth · Bedrooms
Questions
Perfect Fit Blinds — common questions
Will perfect fit damage my window?
No. The brackets sit in the rubber gasket gap and leave no mark when removed. This is why it is the standard recommendation for rented houses and apartments.
Does it work on tilt-and-turn windows?
Yes, and it is a good match — the blind moves with the sash. Confirm the handle clearance when the window is in the tilt position.
Can I get blackout in perfect fit?
You can get very close with a blackout pleated fabric, but the frame is not fully light-sealed at the corners. For true bedroom blackout, a face-fixed roller with side channels is better.
Is it more expensive than a normal blind?
Slightly, per window. But there is no drilling, no making good and usually no fitting time to pay for, so on a full house of uPVC windows it often works out cheaper overall.
Get three quotes
Tell us about your windows once. Vetted local fitters come back to you with prices, usually within two working days. Free, and there's no obligation to book anything.
Start my free quoteBrowse the shop
Ready-made blinds, measuring tools, cord safety kits and fitting hardware — hand-picked and delivered to your door if you'd rather do it yourself.
Visit the shopOther types of blind
Wooden Blinds
Warm, tactile slat blinds in real timber or faux wood.
Day & Night Blinds
Twin fabric layers of alternating stripes that slide to control light.
Vertical Blinds
Rotating fabric louvres that stack to the side — built for wide windows.
Venetian Blinds
Slim aluminium or metal slat blinds with precise light control.
Roman Blinds
Soft fabric blinds that fold into horizontal pleats as they rise.
Roller Blinds
A single sheet of fabric on a tube — the simplest and most versatile blind.
Curtain Poles
Poles, tracks and finials — the hardware that makes curtains hang properly.
Roof & Skylight Blinds
Tensioned blinds with side rails, made for sloped and roof glazing.
Pleated Blinds
Concertina fabric blinds, including insulating honeycomb cells.
Plantation Shutters
Hinged louvred panels fitted to the window — the most permanent option.
Electric & Smart Blinds
Motorised blinds on remote, app or timer control.